Waterproofing is a two-day course designed for the practicing waterproofing consultant and those who are aspiring to become a Registered Waterproofing Consultant. This course focuses on split-slab plaza deck systems, surface-applied waterproofing, and below-grade waterproofing. The course starts with a review of differences between roofing, dampproofing, and waterproofing.
Other topics include waterproofing materials and accessories used for various applications, design and specification, application techniques; and a thorough review of concrete used as a substrate for waterproofing, including typical concrete repair materials and techniques used for restoration of concrete slabs prior to application of waterproofing systems.
Educational Credits: 16

Course Learning Objectives:

1. Review plaza deck and expanded use roof systems.
2. Discuss codes and standards related to the application of waterproofing systems.
3. Identify the various types of waterproofing and the benefits and pitfalls of each system. Bentonite, capillary, hot rubber, multi-ply, sheet membrane and liquid applied.
4. Discuss concrete repair and the correct application of sealants.

• 16 Continuing Educational Hours (CEHs) from IIBEC
• 16 Learning Units (LUs) from the American Institute of Architects

Program location: Doubletree Hotel
16500 Southcenter Pkwy Seattle, WA 98188

Program Cost:* National Member: $525.00 Non-member: $675.00

Program Includes: Continental breakfast, coffee, tea, water and Lunch

Program Time: 7:30am – Registration 8:00am to 5:00pm/each day

Register here:

Puget Sound IIBEC 2 day learning Seminar

01234567891011121314151617181920	Member	525.00 USD
01234567891011121314151617181920	Non-Member	675.00 USD
01234567891011121314151617181920	Student	10.00 USD
012345678910	Sponsor	250.00 USD	per day

Your eTicket will be emailed after payment to your PayPal email address.

Stucco Basics

Location: Double Tree @ Southcenter

Time: 5:30-9:00PM

Course Number:     NWCB-EXT-101

Provider Name:      Northwest Wall And Ceiling Bureau

Provider Number:  G337

This course is an introduction to the use of Portland Cement Plaster (Stucco) as an exterior cladding system applied to both commercial and residential buildings. Participants will be introduced to relevant codes and standards, system layers, components and recent advances.

HSW Justification:
This seminar will discuss: Designs of State-of-the-art moisture, air, thermal and vapor control layers of today’s stucco assemblies. Designs that are intended to help protect the building from unwanted moisture accumulation, material degradation that can reduce the potential for conditions that can lead to mold growth.

Learning Objective 1:
Participants will be presented a review of ICC I-Codes and ASTM Standards applicable to the design and construction of stucco assemblies.

Learning Objective 2:
Participants will learn about the materials and layers of stucco assemblies. How the layers are intended to function, and how they are properly constructed.

Learning Objective 3:
Participants will gain an understanding of the building science behind advanced stucco assemblies.

Learning Objective 4:
Participants will be presented design information on advanced stucco assemblies and how they can meet performance and energy code requirements of the ICC I-Codes

Presenter

Pete Burns has over 30 years of experience in architectural testing and inspections. As a former Technical Representative for the Energy Conservatory, manufacturer of the

Minneapolis Blower Door, Pete provided technical field support and training on residential and commercial enclosure air leakage testing.

Pete is currently the Director of Technical Services for the NW Wall & Ceiling Bureau (NWCB) a

technical trade association of signatory commercial wall & ceiling contractors in Washington and Oregon.

The NWCB is best known for publishing the Stucco Resource Guide since 1979, now in its 4^th Edition.

Peter V. Burns

Director of Technical Services

0123456789101112131415161718192021222324252627282930	Member	60.00 USD
0123456789101112131415161718192021222324252627282930	Non-Member	75.00 USD
012	Sponsor	250.00 USD
Sold Out	Students	USD

Your eTicket will be emailed after payment to your PayPal email address.

WA National, continues to put on a fantastic event for our annual IIBEC Puget Sound Chapter’s golf tournament 2023. Send me your pics and I will add them to our post. We thank our Sponsors and big shout out to our amazing golf tournament coordinator @Carissa Shaw and Golf committee chair @Steve Silcock. #golfouting #IIBEC #dayofplay #networking #Pugetsoundchapter

We will celebrate the year with a catered buffet style meal at the Cedar Brook Lodge.

Save the date; December 7th

Location:

18525 36th Avenue South, Seattle, WA…More details to follow

Presentation and tour includes Lunch

“Tapered Polyiso Insulation, Designing for Commercial Low Slope Roofing”

1. Introduction to Hunter Panels
   1. Who we are and how we fit into the market
   2. What happened this past couple of years with supply chain, product availability and price
   3. Are we out of it and what does the future look like
2. AIA, IIBEC registered presentation

1. 1. Tapered Polyiso Insulation, Designing for Commercial Low Slope Roofing

1. Features and Benefits
2. Key terms

Crickets and saddles and when and where they work

1. Knowing the design intent and being assured that intent is being met
2. Minimum vs Average R Values for tapered design systems

1. Specialty Products – saving time, labor and increased accuracies
   1. It would be useful to have some samples of HD Composite,  pre-cut sumps, ready flash CGF / HD coverboard

Presented By:

Edward R. Krusec AIA, IIBEC

Director of OEM Sales

Edward R. Krusec, AIA, IIBEC, CSI is the Director of OEM Sales, at Hunter Panels. Prior to his 36 years in the roofing industry, Ed, a registered architect, worked in the Chicago office of Skidmore Owings and Merrill. First joining Hunter Panels in 2002 as the Midwest Regional Sales Manager Ed has been has held numerous positions including product manager, technical manager and director of business development. Ed offices out of Hunter’s headquarters in Portland Maine; and has spoken nationally to AIA, CSI, and IIBEC chapters, as well as roofing industry associations, regarding proper roofing assemblies, practices, and the values of proper drainage in tapered roof assemblies.

Ed is a member of the American Institute of Architects, The Polyisocyanurate Insulation Manufacturers Association, The International Institute of Building Enclosure Consultants, The Construction Specifiers Institute, and the U.S. Green Buildings Council.

Location:

19727 57th Ave E

Puyallup WA 98375

We thank our sponsor:

Hunter Panel Tour

Quantity:	Name:	Price:	Description:
012345678910111213141516171819202122232425262728293031323334353637383940	Member	15.00 USD
012345678910111213141516171819202122232425262728293031323334353637383940	non member	25.00 USD

Your eTicket will be emailed after payment to your PayPal email address.